Configure Email Sending or Receiving Using Web Based Management

We recommend using Web Based Management to configure secured email sending with user authentication, or email sending and receiving using SSL/TLS.

Start your web browser.
Type "http://machine's IP address" in your browser's address bar (where "machine's IP address" is the machine's IP address).
For example:
http://192.168.1.2
Type a password if you have set one, and then click .
Click the Network tab.
Click the Protocol menu in the left navigation bar.
In the POP3/IMAP4/SMTP field, click Advanced Settings and make sure the status of POP3/IMAP4/SMTP is Enabled.
Configure the POP3/IMAP4/SMTP settings.
- Confirm that the email settings are correct after configuration by sending a test email.
- If you do not know the POP3/IMAP4/SMTP server settings, contact your network administrator or Internet Service Provider (ISP).
When finished, click Submit.
The Test Send/Receive E-mail Configuration dialog box appears.
Follow the instructions in the dialog box to test the current settings.

Vanliga frågor & felsökning