PT-P750W
![]() |
Часто задаваемые вопросы и устранение неполадок |
When the NFC reader of my Android™ device is tapped against the NFC logo on the P-touch, the device is recognized but cannot connect to the P-touch.
Please check the following:
Make sure the P-touch is on to allow the Android™ device to connect.
You should wait for about 1 minute after the P-touch is turned on before attempting to make an NFC connection.
If the Wi-Fi lamp is not lit on the P-touch, it cannot be connected to your Android™ device.
Press and hold the Wireless Mode button for one second to turn on the wireless LAN function.
Another Android™ device may be connected to the P-touch.
For NFC connections using Wireless Direct, only one device can be connected to the P-touch at a time.
Manually disconnect the other device from the P-touch, wait a while and then try again.
The P-touch may be configured for Ad-hoc Mode in the network settings. The following instructions tell you how to change the settings to Infrastructure Mode.
For Windows
Open the 'Printer Setting Tool', click 'Communication settings' and change the settings to Infrastructure Mode.
Refer to the following FAQ to change the settings (Windows only).
"How do I connect the printer to my computer via Wi-Fi®?"
For Mac (macOS10.15 or earlier)
Open the 'P-touch Utility', click the [Wireless Direct] tab and change the settings for Wireless Direct to [ON].