Innov-is NV1800Q
Întrebări frecvente şi depanare |
How do I adjust a stitch width or length?
This machine is preset with the default settings for the stitch width and stitch length for each stitch. Some models are also preset with the default settings for upper thread tension for each stitch.
You can change the settings for the stitch width and length for each stitch by following the procedure described in this section.
Stitch settings return to their defaults if they are changed, when the machine is turned off or a different stitch is selected before the stitch setting is saved, refer to Saving stitch settings.
The stitch width (zigzag width) can be adjusted to make the stitch wider or narrower.
(1) Shows the stitch width (2) Stitch width keys |
Each press of "-" makes the zigzag stitch narrower.
Each press of "+" makes the zigzag stitch wider.
After adjusting the stitch width, slowly turn the handwheel toward you (counterclockwise) and check that the needle does not touch the presser foot. If the needle hits the presser foot, the needle may bend or break.
The stitch length can be adjusted to make the stitch coarser (longer) or finer (shorter).
(1) Shows the stitch length (2) Stitch length keys |
Each press of "-" makes the stitch finer (shorter).
Each press of "+" makes the stitch length coarser (longer).
If you wish to save specific settings for a stitch so that they can be used later, press after changing the settings to save the new settings with the selected stitch.
This feature can be used only with utility stitches.
(1) Reset key (2) Manual memory key |