SDX2250D
![]() |
Odpowiedzi na często zadawane pytania i rozwiązywanie problemów |
The mat is fed in at an angle.
Case1 : | The mat was inserted into the feed slot at an angle. |
Case2 : | The corners of the mat are deformed (bent). |
Case3 : | The rear tray is not pulled out. |
Case4 : | The feed roller is not positioned correctly. |
Case5 : | The shaft is released. |
----- Case1 -----
Press the (Feed) button to feed out the mat.
Re-insert the mat straight in.
![]() |
![]() |
![]() |
----- Case2 -----
Replace the mat with a new one.
----- Case3 -----
Pull out the rear tray.
----- Case4 -----
Adjust the position of the feed roller.
For details, refer to Adjusting the Position of the Feed Roller
----- Case5 -----
Lock the shaft.