Print  |  Close


FAQs & Troubleshooting

FAQs & Troubleshooting

How do I install the Duplex Unit?

Be sure to switch off the power and unplug the power cord from the outlet before carrying out the operations. If not, you might get an electrical shock.

Follow the procedure below to install the Duplex Unit.

  1. Turn off the printer power switch.

  2. Pull out the power cord from the AC power outlet/socket and then the printer.

  3. Remove the packing that protects the duplex unit connector.

  4. Push in the packing cover from the printer by pushing the two tabs as shown in the illustration.

  5. Insert the right and left tabs at the bottom of the duplex unit into the holes at the back of the printer and then align the top part of the duplex unit with the printer.
    Ensure that the connector of the duplex unit is connected to the connector of the printer.

  6. Tighten the screws at both ends of the bottom of the duplex unit.


    Turn the printer switch back on.

Print  |  Close