FAQs & Troubleshooting
How to register Your Machine with CanvasWorkspace
When registering your machine with CanvasWorkspace, you can transfer the data from your computer to the cutting machine via a wireless network connection.
Some of the optional pattern collections may not be available unless you register the machine.
After you have registered your machine with CanvasWorkspace, they will be able to communicate via a wireless network connection to transfer data back and forth.
|Wireless network access point/router
Computer/Tablet connected to wireless network access point/router
Your ScanNCut machine and your CanvasWorkspace login ID will be registered together.
In the following procedures, [MACHINE] indicates operations performed from your machine, and [COMPUTER / TABLET] indicates operations performed in CanvasWorkspace.
|Page 1||Page 2|
If you stopped the procedure after setting up the wireless network, touch the [Register]
key beside ScanNCut Online on page 7 of the settings screen to start again with registering your machine with CanvasWorkspace.
The same screen that appeared immediately after setting up the wireless network will be displayed.
After the following screen, describing how to obtain the PIN code, appears, leave the screen displayed, and then continue with the next [Computer/Tablet] operation.
|(1) Machine number|
Do not touch the OK key yet.
Your machine number appearing in the screen will be used in the following step.
If you use a mobile device, use the CanvasWorkspace (Web).
Your machine number appears on your machine in the screen shown in step 2 describing how to obtain the PIN code.
The following screen appears.
|CanvasWorkspace login ID linked to your machine.|
Touch this key to link your machine with a different CanvasWorkspace login ID.
Then perform the registration operation again.
Touch this key to delete the currently linked CanvasWorkspace login ID.
This completes the registration of your machine with CanvasWorkspace.