Print  |  Close

DCP-L3551CDW

FAQs & Troubleshooting

FAQs & Troubleshooting

Calibrate Colour Output

The output density for each colour may vary depending on the machine’s environment, including factors like temperature and humidity. Calibrating your machine helps improve the output colour density.
If you are using the Mac printer driver, the printer driver automatically retrieves the calibration data. To retrieve the data manually, you must perform the calibration using Brother's Status Monitor.

DCP-L3510CDW/DCP-L3551CDW

  1. Press Menu.
  2. Press or to select the following:
    1. Select [Printer]. Press OK.
    2. Select [Clr Correction]. Press OK.
    3. Select [Calibration]. Press OK.
    4. Select [Calibrate]. Press OK.
  3. Press to select the [Yes] option.
    Calibration starts automatically, and will take a few minutes.
  4. Press Stop/Exit.

MFC-L3710CW/MFC-L3735CDN/MFC-L3745CDW/MFC-L3750CDW/MFC-L3770CDW

  1. Press [Toner]>[Calibration]>[Calibrate].
  2. Press [Yes].
    Calibration starts automatically, and will take a few minutes.
  3. Press .

Print  |  Close