Print  |  Close

DCP-L3551CDW

FAQs & Troubleshooting

FAQs & Troubleshooting

Enable the Brother machine's network interface.

Follow the steps below to enable or disable the Brother machine's network interface (wired LAN or wireless LAN).

A wired and a wireless network connection cannot be used at the same time. Enable the network connection type you want to use and then disable the other.

  1. Press Menu.
  2. Press the Up or Down arrow key to select Network. Press OK.
  3. Press the Up or Down arrow key to select Wired LAN or WLAN. Press OK.
  4. Press the Up or Down arrow key to select Wired Enable or WLAN Enable. Press OK.
  5. Press the Up or Down arrow key to select On or Off.
  6. Press OK.
  7. Press Stop/Exit or Cancel.

(For wireless network users)
If you want to set up your Brother machine on a wireless network, see the following FAQ.
> Click here to see how to set up your Brother machine on a wireless network.

If your Brother machine still having an issue over the network feature, see the Related FAQs at the end of the page.

Print  |  Close