-
Press
[Function] key.
-
Press
to select [Margin] and press
.
-
Press
to select [Full/Half/Narrow/Chain Print] and press
.
[Full / Half / Narrow]
For leaving equal margins on both sides of the text.
The margin lengths are as follows:
![Full - Half - Narrow Full - Half - Narrow](/g/b/img/faqend/faqp00001475_000/nz/en/17903/margin.jpg)
[Chain Print]
For creating a label containing text in various styles.
-
Enter text.
-
Press
, then [OK to Feed?] appears.
-
Press
to enter more texts.
-
Press
, then [OK to Feed?] appears.
![Screen Screen](/g/b/img/faqend/faqp00001475_000/nz/en/17907/chainprint.jpg)
-
Press
to feed and cut after entering the last text.
-
When [Half] or [Narrow] is set, feed the tape before using the cutter otherwise a part of the text may be cut off. Also, cut along the printed dots (:) with scissors so the text is centered in the label.
-
To print more than 1 copy of a label with minimum margin, set the margin [Narrow] and select [Copies] for [Print Options] function.
-
Do not try to pull the tape since this may damage the tape cassette.