How do I set a tape cassette?
Follow the instructions below:
-
Open the Cassette Cover.
-
Confirm the edge of the tape is aligned with the Tape Exit Slot.
-
Insert the Tape Cassette into the printer until it locks into place.
-
After the tape passes under the Tape Guide, pull the edge to remove any slack in the tape.
-
Make sure the tape is not caught in the unit when inserting or removing the Tape Cassette.
-
Close the Cassette Cover.
Be careful not to pinch your fingers when closing the Cassette Cover. There is a risk of injury.
Do not leave any printed labels in the Tape Exit Slot. Doing so will cause label jams.