Innov-is BQ3100
FAQs & Troubleshooting |
* The following procedure is applied to the machine with software between version 1.01 and 1.04.
Before start sewing, test the pattern first from steps 1 to 6 to see if the stitch can be used with this function.
* The sensor functions screen appears.
If (Sewing end point setting key) is not available, the sewing end point cannot be specified with the selected stitch pattern.
Select a different stitch pattern.
(1) To erase the specified sewing end point, press RESET key.
(2) To stop specifying a setting with the sensor pen, press CANCEL key.
(3) This key is not available when selecting the Utility Stitch patterns.
(1) Displayed distance
The setting can also be applied by long touching an adjustment area with the sensor pen.
If a different pattern is selected after the sewing end point has been specified, the end point setting is erased.
* The machine stops near the specified end point automatically.
If the machine finishes sewing before arriving at the specified end point, sew manually to add stitches up to the desired sewing end point.
For a better sewing results, take notice of the following things.