Innov-is XJ1
![]() |
FAQs & Troubleshooting |
How do I thread my machine when using the twin needle mode ?
The twin needle can only be used for patterns that show after being selected. Before you select a stitch pattern, make sure the stitch can be sewn in the twin needle mode.
If the message “OK to automatically lower the presser foot?” appears on the LCD screen, press " OK " to continue.
![]() |
(1) Needle bar thread guide |
The “Automatic Threading” button cannot be used.
Manually thread the twin needle from front to back.
Using the “Automatic Threading” button may result in damage to the machine.
![]() |
(1) Supplemental spool pin |
![]() |
(1) Spool cap
(2) Spool pin
(3) Spool of thread |
![]() |
(1) Thread guide |
Do not place the thread in the pre-tension disks.
![]() |
(1) Needle bar thread guide |
The “Automatic Threading” button cannot be used.
Manually thread the twin needle from front to back.
Using the “Automatic Threading” button may result in damage to the machine.
>> appears. Twin needle mode is set.
![]() |
(1) Single needle / twin needle setting |
To change direction when sewing with the twin needle, raise the needle from the fabric, raise the presser foot lever, and then turn the fabric.