QC-1000
FAQs & Troubleshooting |
How do I thread the needle?
If you try to thread the needle with the needle threader lever without raising it, damage to the machine may result.
Notch of the thread guide Thread guide disc |
Make sure that the thread passes the notch of the thread guide.
Thread cutter |
When using thread that quickly winds off the spool, such as metallic thread, it may be difficult to thread the needle if the thread is cut. Therefore, instead of using the thread cutter, pull out about 80 mm (approx. 3 inches) of thread after passing it through the thread guide disks (marked "7").
80 mm or more |
Needle threader lever | Needle Hook |
When pulling out the thread, do not pull it with extreme force, otherwise the needle may bend or break.
5 cm (2 inches) |
The upper threading is finished.