CS-8060
![]() |
FAQs & Troubleshooting |
How do I wind the bobbin?
Wind the thread around the bobbin to prepare the bobbin thread.
![]() |
![]() |
![]() |
![]() |
![]() |
![]() ![]() |
Use the special Brother embroidery bobbin thread when embroidering.
![]() |
![]() ![]() ![]() |
Make sure that the thread passes under the pretension disk.
Be sure to pull the thread tightly and wind it clockwise. If the thread is wound counterclockwise, the thread may wind around the bobbin winder shaft.
![]() |
![]() (with built-in cutter) |
![]() |
![]() |
![]() |
![]() |
Do not get away from the machine while winding the bobbin. Make sure that the bobbin thread is being winded correctly. If the bobbin thread is winded incorrectly, press the Start/stop button or operate the foot controller immediately to stop the bobbin winding.
When the bobbin winding stops or becomes slow, stop the machine.
Otherwise, the sewing machine may be damaged.
If the bobbin winder shaft is set to the right side, the needle will not move. (Sewing is impossible.)