Innov-is F460
![]() |
Vanlige spørsmål og feilsøking |
How do I change the needle ?
Sewing with a bent needle is extremely dangerous since the needle may break while the machine is being operated. Before using the needle, place the flat side of the needle on a flat surface and check that the distance between the needle and the flat surface is even.
![]() |
(1) Flat side
(2) Needle type marking |
If the distance between the needle and the flat surface is not even, the needle is bent. Do not use a bent needle.
![]() |
(1) Flat surface |
Replace the needle in cases such as the four described below:
Before replacing the needle, cover the hole in the needle plate with fabric or paper to prevent the needle from falling into the machine.
![]() |
(1) Presser foot lever |
The screen changes, and all keys and operation buttons are locked (except ).
The needle clamp screw can also be loosened or tightened with the disc-shaped screwdriver.
![]() |
(1) Screwdriver
(2) Needle clamp screw |
![]() |
(1) Needle stopper |
Be sure to insert the needle until it touches the needle stopper and securely tighten the needle clamp screw with the screwdriver, otherwise the needle may break or damage may result.