CV3550
FAQs & Troubleshooting |
How to remove and install the needle
|
|
|
(A) Removing the left needle |
(B) Removing the center needle |
(C) Removing the right needle |
Use a new needle that has been determined to be straight according to the instructins in "Checking the needle".
|
|
|
(A) Installing the left needle |
(B) Installing the center needle |
(C) Installing the right needle |
Be sure to insert the needles all the way.
This machine uses a standard home sewing machine needle.
The recommended needle is SCHMETZ 130/705H (90/#14).
|
(1) Back (flat side) |
Sewing with a bent needle is extremely dangerous since the needle may break while the machine is being operated.
Before using the needle, place the flat side of the needle on a flat surface and check that the distance between the needle and the flat surface is even.
If the distance between the needle and the flat surface is not even, the needle is bent.
Do not use a bent needle.
|
(4) Flat surface |
Fabric damage can be reduced by using 130/705H SUK (#90) BALL POINT.