Print  |  Close

TD-2120N

FAQs & Troubleshooting

FAQs & Troubleshooting

Creating a label with GIMP (Linux®)

To create a label with GIMP, do the following:

  1. Open a new file with the image size supported by the label.
  2. Edit the image.
  3. Open the print menu and set the following configuration for your printer.
    "Image Settings" Tab -> "Adjust Page Size and Orientation"

    The supported media length for continuous tape is about 100 mm.

    Use the paper tool command to add a custom media size longer/shorter than 100 mm.
    For more information, see "Adding a custom media size for continuous tape (Linux®)".

Print  |  Close