Innov-is 15P
FAQs & Troubleshooting |
Error Message | Probable Cause | Remedy |
The start/stop button or reverse/reinforcement stitch button was pressed while the presser (The foot controller was depressed if it is connected.) foot was raised. | Lower the presser foot before continuing the operation. | |
A stitch other than the buttonhole or bar tack stitch was selected and the start/stop button was pressed (The foot controller was depressed if it is connected.) while the buttonhole lever is lowered. | Raise the buttonhole lever before continuing the operation. | |
The buttonhole or bar tack stitch was selected and the start/stop button was pressed (The foot controller was depressed if it is connected.) while the buttonhole lever is raised. | Lower the buttonhole lever before continuing the operation. | |
The reverse/reinforcement stitch button or needle position button was pressed while the bobbin winder shaft is moved to the right. | Move the bobbin winder shaft to the left before continuing the operation. | |
The start/stop button was pressed, even though the foot controller is connected. | Disconnect the foot controller, and then press the start/stop button. Otherwise, operate the machine by using the foot controller. |
If error message "F1" through "F9" appears in the LCD while the sewing machine is being used, the machine may be malfunctioning.
Contact your dealer or the nearest authorized service center.