Changing scan settings in ControlCenter.
To display the scan settings in ControlCenter, follow the steps below.
NOTE: The screens may differ depending on operating system being used and your Brother machine
-Windows
-Macintosh
Windows
-
In the Scan tab, right-click the button you want to configure, and then click Button settings.
The settings dialog box appears.
![Click Button settings Click Button settings](/g/b/img/faqend/faq00100150_000/my/en/1011328/Windows_ClickButtonSettings.jpg)
-
Change the settings as needed, and then click OK.
![Settings dialog box Settings dialog box](/g/b/img/faqend/faq00100150_000/my/en/1011329/Windows_SettingsDialogBox.jpg)
-
The machine will now use the new settings when you scan from ControlCenter4.
Macintosh
-
In the Scan tab (1), press and hold the Control key and click the button you want to configure.
The settings dialog box appears.
![Click SCAN tab Click SCAN tab](/g/b/img/faqend/faq00100150_000/my/en/1011330/Mac_ClickSCANTab.jpg)
-
Change the settings as needed, and then click OK.
![Settings dialog box Settings dialog box](/g/b/img/faqend/faq00100150_000/my/en/1011331/Mac_SettingsDialogBox.jpg)
-
The machine will now use the new settings when you scan from ControlCenter2.