MFC-J3720
FAQs & Troubleshooting |
Check the following points to resolve the paper feed issue.
NOTE: Illustrations shown below are from a representative product and may differ from your Brother machine.
You cannot load several kinds of paper in the paper tray simultaneously. Remove the different kinds of paper.
Fan the stack of paper well, and then put it back in the paper tray.
When loading paper, be careful not to push the paper in too far. It may lift at the back of the tray and cause feed issues. Gently put the paper into the paper tray print side down. Check that the paper is flat in the tray as below.
If you want to add more paper before the tray is empty, remove the paper from tray and combine it with the paper you are adding. Always fan the stack of paper well before loading it in the tray.
If the machine feeds multiple sheets of paper when there are only a few sheets left in the tray, clean the Base Pad (1) with a soft lint-free cloth moistened with water.
After cleaning, wipe the pad with a dry, soft lint-free cloth to remove all moisture.