Print  |  Close

HL-5380DN

FAQs & Troubleshooting

FAQs & Troubleshooting

Print overrun

Please do the following:

 

 

  • Press Go to print the remaining data in the printer memory. Cancel the print job, if you want to delete the remaining data in the printer memory.
  • Set page protection to AUTO by using the supplied Windows driver.
  • Change the following settings in the Windows printer driver and try again. The best combination of the settings below will vary depending on your document:
    +Graphics *
    +TrueType mode *
    +Use Printer TrueType® Fonts
    * To change these settings, click 'Basic' tab of the printer driver. Select 'Manual' in the 'Print Settings' section. Click 'Manual Setting...'.
 
 
 
Print  |  Close