PR-620/620C/600II/600IIC
FAQs & Troubleshooting |
How do I thread the machine? (Threading the upper thread)
The path that the embroidery machine should be threaded is indicated by a line on the machine.
3. Moving the needle bar to be threaded to the sewing position
(1) Hole in the thread guide above the spool (2) Hole in the thread guide toward the front of the machine |
(1) Hole in upper thread guide |
(1) Upper thread guide |
(1) Thread tension disc |
Make sure that the thread is securely caught in the thread tension disc and passed correct thread guide pins.
All thread tension disks are threaded in clockwise direction.
(1) Pass around here. |
(1) Middle thread guide (2) Thread guide pin |
(1) Thread take-up lever |
(1) Hole in lower thread guide |
(1) Needle bar thread guide (2) Needle changing tool (Threader) |
+ If the needle is not fully inserted, the hook of the automatic needle-threading mechanism will not pass through the eye of the needle during automatic needle threading, and the hook may bend or the needle cannot be threaded.
+ While the hook of the automatic needle-threading mechanism is passed through the eye of the needle, do not rotate the handwheel, otherwise the automatic needle-threading mechanism may be damaged.
+ The automatic needle-threading mechanism can thread one needle at the sewing position. When this mechanism is used, be sure that the needle bar that you want to thread is positioned as the sewing position, otherwise the automatic needle-threading mechanism cannot be used at the particular needle. If the needle bar is not at the sewing position, move it there. => 3. Moving the needle bar to be threaded to the sewing position
,
* Operation panel varies depending on the model.
(1) Hook (2) Fork |
(1) Guide on presser foot (2) Notch in guide on presser foot |
(1) Groove in thread cutter |
+ If the thread is not correctly passed through the groove in the thread cutter, the message "Wiper error." appears and the needle cannot be threaded. Be sure to securely pass the thread through the groove.
+ If enough thread is not pulled out, the thread cannot be pulled through the thread cutter.
,
* Operation panel varies depending on the model.
3. Moving the needle bar to be threaded to the sewing position
[PR-600, PR-600II, PR-620]
[PR-650, PR650e, PR655]
Follow instructions below to view an operation video on the LCD of the machine.
[PR-600, PR-600II, PR-620]
⇒ ([OPERATIONS] key) ⇒ ⇒ ⇒
[PR-650, PR650e, PR655]
⇒ ([Basic Operation] key) ⇒ ⇒