Wind and insert the bobbin before attaching the embroidery frame.
Attaching the Embroidery Frame
-
Press the “Presser Foot Lifter” button to raise the presser foot.
-
Align the embroidery frame guide with the right edge of the embroidery frame holder.
![image](/g/b/img/faqend/faqh00000639_000/in/en/29621/1.gif)
(1) Embroidery frame holder (2) Embroidery frame guide
-
Slide the embroidery frame into the holder,
making sure to align the embroidery frame’s
with the holder’s
.
![image](/g/b/img/faqend/faqh00000639_000/in/en/29624/4.gif)
(1) Arrow mark
-
Lower the frame-securing lever to be level with the frame to secure the embroidery frame in the embroidery frame holder.
![image](/g/b/img/faqend/faqh00000639_000/in/en/29625/5.gif)
(1) Frame-securing lever
If the frame-securing lever is not lowered, the following message appears.
You cannot start sewing until you lower the frame-securing lever.
![image](/g/b/img/faqend/faqh00000639_000/in/en/29629/92.gif)
Removing the Embroidery Frame
-
Raise the frame-securing lever.
![image](/g/b/img/faqend/faqh00000639_000/in/en/29627/7.gif)
-
Pull the embroidery frame toward you.
![image](/g/b/img/faqend/faqh00000639_000/in/en/29628/8.gif)