Innov-is 15P
FAQs & Troubleshooting |
How do I thread the machine using the Twin Needle?
With the twin needle, you can sew two parallel lines of the same stitch with two different threads.
Both upper threads should have the same thickness and quality.
Be sure to use the twin needle, the extra spool pin and the spool cap.
Twin needle Extra spool pin |
Install the twin needle.
Thread the upper thread for the left needle eye.
Manually thread the left needle with the upper thread.
Pass the thread through the eye of the needle from the front.
The needle threader cannot be used with the twin needle.
If the needle threader is used with the twin needle, the sewing machine may be damaged.
Insert the extra spool pin into the end of the bobbin winder shaft.
Thread spool Extra spool pin Bobbin winder shaft |
Install the thread spool and thread the upper thread.
When setting the thread spool, set it so that the thread winds off from the front of the spool.
Thread the upper thread for the right side in the same way that the upper thread for the left side was threaded.
Thread guide cover |
For details, refer to "Upper Threading (Threading the upper thread) " of "Preparation" category.
Without passing the thread through the needle bar thread guide, manually thread the right needle.
Pass the thread through the eye of the needle from the front.
The needle threader cannot be used with the twin needle.
Attach zigzag foot "J".
When using the twin needle, be sure to attach zigzag foot "J", otherwise the needle may break or the machine may be damaged.
Turn on the sewing machine and select a stitch.
After adjusting the stitch width, slowly turn the handwheel toward you (counterclockwise) and check that the needle does not touch the presser foot.
If the needle hits the presser foot, the needle may bend or break.
When using the twin needle, be sure to select an appropriate stitch, otherwise the needle may break or the machine may be damaged.
Start sewing.
Two lines of stitching are sewn parallel to each other.