"E2" message appears on the LCD.
![E2 E2](/g/b/img/faqend/faqh00000059_002/id/en/1932755/faqh0059_fig1001.gif)
Cause
This message is displayed when an erroneous operation is performed as follows.
-
The Start/Stop button is pressed while a stitch other than the buttonhole or bar tack stitch is selected and the buttonhole lever is lowered.
-
The Reverse/Reinforcement stitch button is pressed while a stitch other than the buttonhole or bar tack stitch is selected and the buttonhole lever is lowered.
-
The foot controller is pressed while a stitch other than the buttonhole or bar tack stitch is selected and the buttonhole lever is lowered.
Solution
Raise the buttonhole lever before continuing the operation.