PT-P700
![]() |
常見問題&故障排除 |
What do the indicator lights mean?
The indicators light and blink to indicate the printer's status. The following symbols are used in this FAQ to explain the meaning of the different indicator colors and patterns.
![]() ![]() ![]() |
Indicator is lit in the color shown |
![]() ![]() ![]() |
Indicator is blinking in the color shown * Blinking patterns differ depending on the situation as shown in the table below. |
![]() |
Indicator is off |
Status |
Condition |
Solution |
![]() |
Power is OFF. | - |
![]() |
Power is ON. | - |
![]() |
Receiving data Transferring data |
- |
![]() |
Cassette cover open |
Close the cassette cover correctly. |
Reset in progress |
Starting the reset procedure, or the Feed & Cut button was pressed during the reset procedure. |
|
![]() |
Cooling |
The print head or motor is too hot.
Also, make sure that the printer has adequate ventilation and is not located in an enclosed space. This condition may occur more often when the printer is used at a high altitude (above 3,048 m / 10,000 feet) due to the lower air density available to cool the printer. |
![]() |
Reset in progress | - |
![]() |
In boot mode |
The power cord was unplugged or the machine’s power was turned off while the firmware was being updated, may cause the machine in boot mode. In this case, transfer the program again. If the error still occurs, contact Brother Customer Service. |
![]() (Once every 0.9 seconds) |
Error
|
Is the correct cassette installed?
Is the cassette installed correctly?
Is there enough of the tape remaining? If the error still occurs, check for the following:
|
![]() (Once every 0.3 seconds) |
System error | Turn off the printer, and then turn it on again. If the error still occurs, contact Brother Customer Service. |