Innov-is NV2700
![]() |
FAQs & Troubleshooting |
List of Error Messages for Artspira app (M#######/E#####)
When the following error screen appears on your device, perform the necessary operation.
Refer to the solution for each error code with clicking the error code in the following table.
Error Code is the number described at the end of the message on the error screen as below.
![]() |
(1) Error code |
Error Code | Error Message |
M1332002 | Login failed. Please check your entries and log in again.(M1332002) |
M2102501 | The data could not be saved on the server. Check the network.(M2102501) |
M2513631 | The data could not be downloaded. Please try again.(M2513631) |
M3124301 | Rename failed, Please try again.(M3124301) |
M4210001 | There is no data that can be output.(M4210001) |
M4341001 | This data cannot be used. It exceeds the maximum embroidering range of the registered embroidery machine.(M4341001) |
M4345001 | Check the embroidery machine you are using to see if this data is available.(M4345001) |
M4452001 | The current font size is below the recommended minimum size for the selected font. The shape may collapse during embroidering.(M4452001) |
M5541001 | This data cannot be transferred. It exceeds the maximum embroidering range of the registered embroidery machine.(M5541001) |
M5612301 | The printer cannot be connected. Search for the printer again.(M5612301) |
M5613201 | The data could not be sent.(M5613201) |
M5622201 | The data could not be transferred.(M5622201) |
M6331001 | Cannot be placed outside the drawing area.(M6331001) |
E92001 | Operation not allowed. The selected objects include open paths or self-intersecting paths.(E92001) |
E96001 | The selected shape is too large. Unable to fill with plural pieces of shapes.(E96001) |