To switch between registered restricted users or Public mode when Secure Function Lock is turned on, follow the steps listed below.
Changing to the restricted user Mode:*If your Brother machine has a touchscreen,
please follow the steps under "For touchscreen models" below.
- Hold down Shift as you press Secure or Secure Print.
- Press the Up or Down arrow key to choose your user name(ID). Press OK.
- Enter your four-digit password. Press OK.
<For touchscreen models>
- Press Public or xxxxx (where xxxxx is the user's name).
- Press Change User.
- Press the Up or Down arrow key to display your user name. Press your user name.
- Enter your four-digit password. Press OK.
Changing to the Public Mode:After a restricted user has finished using the machine, it will return to the Public setting within the same time as the
Mode Timer setting (
Menu =>
General Setup =>
Mode Timer).
You can also exit from the restricted user mode by following the steps below.
*If your Brother machine has a touchscreen,
please follow the steps under "For touchscreen models" below.
- Press the current Mode key you are in.
- The LCD will ask you Go to Public?.
- Press 1 to choose Yes.
<For touchscreen models>
- Press xxxxx (where xxxxx is the user's name).
- Press Go to Public.