MFC-680CN
 |
FAQs & Troubleshooting |
Print command (LPR) (Linux)
CUPS Users Only
The LPR command is not available in CUPS. To configure your machine, use your application's print dialogue box or the CUPS web interface "http://localhost:631/printers".
Print Command :
lpr -P (printer name) (filename)
Configuration Command :
brprintconfij2 -P [Printer Name] [Option]
You can view the details of Parameter by the following command.
Command: brprintconf_{Model Name without "-"}
E.g. MFC-J430W： brprintconf_mfcj430w
Option Table
| Category | Option | Parameter Example |
| Media | -md [parameter] | PLAIN |
| Resolution | -reso [parameter] | Photo |
| Bi-Dir Printing | -bidir [parameter] | ON |
| MirrorPrint | -mirro [parameter] | ON |
| Paper Type | -pt [parameter] | A4 |
| Paper Thickness *1 | -thick [parameter] | THICK |
| Paper Source *1 | -feed [parameter] | AUTO |
| Color Or Mono | -corm [parameter] | COLOR |
| Document | -doc [parameter] | PHOTO |
| Color Matching *2 | -cm [parameter] | NATURAL |
| Half Tone *2 | -ht [parameter] | DIFFUSION |
| Color Enhance | -ce [parameter] | ON |
| Brightness *3 | -brit [parameter] | [-20 - +20] |
| Contrast *3 | -cont [parameter] | [-20 - +20] |
|
Red Key *3 |
-red [parameter] | [-20 - +20] |
| Green Key *3 | -green [parameter] | [-20 - +20] |
| Blue Key *3 | -blue [parameter] | [-20 - +20] |
| Slow Dry | -sd [parameter] | ON |
*1: Available only for applicable models.
*2: Available only when you select "CUSTOM" in the "Document" option.
*3: Available only when you select "ON" in the "Color Enhance" option.