Innov-is NV870SE
FAQs & Troubleshooting |
How do I set the bobbin ?
Install the bobbin wound with thread.
You can begin sewing immediately without pulling up the bobbin thread by simply inserting the bobbin in the bobbin case and guiding the thread through the slit in the needle plate cover.
When the message “OK to automatically lower the presser foot? ” appears on the LCD screen, press "OK" to continue.
The screen changes, and all keys and operation buttons are locked (except ).
(1) Bobbin cover
(2) Latch |
(1) Tab |
Be sure to hold down the bobbin with your finger and unwind the bobbin thread correctly, otherwise the thread may break or the thread tension will be incorrect.
If the thread is not correctly inserted through the tension-adjusting spring of the bobbin case, it may cause incorrect thread tension.
(1) Tension-adjusting spring |