ADS-2600W
FAQs & Troubleshooting |
Configure the Brother machine for a wireless network using automatic wireless mode (Wi-Fi Protected Setup or AOSS™)
If you have a WLAN access point/router supporting WPS (Wi-Fi Protected Setup) or AOSS™ (AirStation One-Touch Secure System), you can easily connect your Brother machine to your wireless network as below.
To use WPS or AOSS™, your WLAN access point/router must support WPS or AOSS™. Confirm your WLAN access point/router has the WPS or AOSS™ symbol as shown below. For more details, refer to the instructions provided with your access point/router.
The range may differ depending on your environment. Refer to the instructions provided with your access point/router.
The length holding down the button may differ depending on the WLAN access point/router. For the information on how to confirm if the WLAN access point/router is ready for use, refer to the instructions provided with your access point/router.
Continue to the following steps to install the scanner driver for network connection. Even if you have scanned with USB connection, you need to install the scanner driver for network connection.
NOTE: The screens may differ depending on operating system being used and your Brother machine.
If there are any programs running, close them.
For Windows users:
If you do not have the DVD-ROM, go to Downloads section of this website and download Full Driver & Software Package. The installation instructions are available on the download page.
For Macintosh users:
If you do not have the DVD-ROM, go to Downloads section of this website and download the scanner driver. The installation instructions are available on the download page.
When the User Account Control screen appears, click Allow or Yes.