PJ-763
![]() |
FAQs & Troubleshooting |
I can no longer print from my PC via Bluetooth, even though I could print previously.
To resolve the issue, update to the latest firmware version. Download and install the latest firmware version from the [Downloads] section.
If you cannot update to the latest version of firmware, it is still possible to resolve the issue by following the steps below.
For Windows:
Change the port used for printing.
If you are using Windows® 10, check if the Windows KB3140743 update that helps with Bluetooth issues is applied.
To change the printer ports, follow the steps below:
There is a possibility that the last page of your print job does not print even if you changed the printer port (the Green LED will keep blinking and the printer will not print.). If this occurs, try to print the last page again.
This issue was fixed in the latest firmware.
For Mac:
Press and hold the Bluetooth button on the printer to turn Bluetooth off, then press and hold the Bluetooth button again to turn it on.