TD-4650TNWB
![]() |
FAQs & Troubleshooting |
How to configure your printer by web browser
You can use a user-friendly setup interface and the capability to manage the printer remotely over a network.
First, confirm your printer's IP address.
If your web browser displays an additional security dialogue box, type the default ID and password and click [OK].
Default ID: "root" or "admin"
Default Password: The password located either on the bottom, inside or back of the printer and preceded by "Pwd".
For more information, see [IMPORTANT – Network Security Notice: Default Login Password Change] on the [Manuals] page.
General Setup The settings shown on this page are the printer's current settings. These settings can be changed by entering a new value in the text-box or by selecting a different value from the options and clicking the Set button to implement the settings. You can also click the Refresh button to retrieve the latest printer settings. |
![]() |
||
Adjust Setup Enter the new value in the text-box and click the Set button to program the settings. Click the Refresh button to retrieve the updated printer settings. |
![]()
|
||
Media Setup This option is used to set the media size, select the media sensor type and the print method. |
![]() |
||
Calibration Setup This option is used to explore the printer sensor intensity settings and set the sensor intensity. |
![]() |
||
Serial Port Setup This option is used to view/set the RS-232 interface baud rate, data bits, parity and stop bit. |
![]() |
||
Network Port Setup This option is used to explore/set the printer internal print server network settings. |
![]() |
||
Email Setup After setting this option, you will be able to receive notification of printer errors by Email.
|
![]() |
||
Clock Setup This option is used to configure the clock settings. |
![]() |
||
Password Setup This option is used to set the password information.
If required, type your ID and password. If you have not set your own password, use the following: |
![]() |
Printer Function In this option, you can reset the printer, restore the printer to factory defaults, print current printer configuration, ignore AUTO.BAS file, calibrate the sensor and send a file to the printer. |
The Send File to Printer button is for sending the command to the printer.
|
||
Printer Firmware Upgrade This option is used to upgrade the printer firmware. Use the Browse button to select the firmware location and then click the Upgrade button to update the firmware. |
Please do not disconnect the printer power or interrupt the firmware update process. The printer may not boot properly. |
||
Printer Status
|
![]() |
||
Printer File This option allows you to use the following functions:
|
![]() |