For TD-4T / TJ-4T series:
To use P-touch Editor, download and install “Printer Driver for P-touch Editor” from the [Downloads] section of this website.
Load the Access file to P-touch Editor and print the file as described below.
In this example, we will use a database defined in Access as follows:
The "Image" field is an "OLE object" data type, and a bitmap file (.bmp) is inserted.
![Access file Access file](/g/b/img/faqend/faqp00010540_001/gb/en/1032679/access.gif)
-
Start P-touch Editor, set the printer and media size, and then click [File] - [Database] - [Connect].
-
On the [Open Database] screen, select [Connect Database File], click [Browse], and locate the folder where the above Access file is saved.
-
Select the Access file and click [Next]. The Access data appears.
The "Image" (OLE object) field does not appear in P-touch Editor, but the file is correctly connected.
-
Click [Insert] - [Database Field]. (If [Insert] does not appear in the menu bar, click the area where the tape is shown.)
![Select Database Field Select Database Field](/g/b/img/faqend/faqp00010540_001/gb/en/1032680/pted03.gif)
-
Select "Image" for "Merge Type" and then select the desired image. The image of the "Image" field appears.
![Merge Fields Merge Fields](/g/b/img/faqend/faqp00010540_001/gb/en/1371269/database.jpg)
![Image appears Image appears](/g/b/img/faqend/faqp00010540_001/gb/en/1032682/pted05.gif)
-
Click [Insert] - [Database Field]. On the [Merge Fields] screen, select "Model" and then click [OK]. The "Model" field appears.
![Merge Fields screen - Select Model Merge Fields screen - Select Model](/g/b/img/faqend/faqp00010540_001/gb/en/1032683/pted04.gif)
![Model appears Model appears](/g/b/img/faqend/faqp00010540_001/gb/en/1032684/pted06.gif)
-
Click [File] - [Print] to print.
![Layout completed Layout completed](/g/b/img/faqend/faqp00010540_001/gb/en/1032685/pted07.gif)