QL-580N
 |
FAQs & Troubleshooting |
Which interface cable can I use?
QL-580N should be used the following interface.
- USB cable
Use the enclosed interface cable. - RS-232C cable
Do not use an interface cable that is longer than 6 feet. (2.0 meters) - Network cable
Use a straight - through Category5 (or greater) twisted - pair cable for 10BASE - T or 100 BASE - TX FAST Ethernet Network.
It is not possible to connect RS-232C cable and USB cable to the printer at the same time and use it. The RS232C serial connector part of this equipment is not Limited Power Source.