RJ-2140
![]() |
FAQs & Troubleshooting |
How do I insert/change the paper or label roll?
1 Roll guide adjustment lever
2 Roll guide
3 Print surface (faces outwards on the roll)
Make sure that both roll guides are properly positioned to prevent the media roll from moving sideways.
The thermal sensitive side must be on the outside of the roll and installed as shown to print correctly.
While pushing the roll release lever, tilt one of the roll guides slightly, and then remove the roll. The roll can be removed without changing the position of the roll guides.
Do not forcefully tilt the roll guides too far. Otherwise, the roll guides could break
1 Roll release lever
2 Roll guide