RJ-2050
 |
FAQs & Troubleshooting |
How do I install/change the label roll?
-
Push the cover open lever to open the RD Roll compartment cover.
1 Cover open lever
-
Inserting or removing the paper or label roll.
-
Insert an RD Roll into the RD Roll compartment with the roll feeding from the bottom as shown.
1 Print surface (faces outwards on the roll)The thermal sensitive side must be on the outside of the roll and installed as shown to print properly.
-
Remove the roll.
-
Insert an RD Roll into the RD Roll compartment with the roll feeding from the bottom as shown.
-
Close the RD Roll compartment by pressing down on the centre of the cover until it latches.
