TD-4100N
![]() |
FAQs & Troubleshooting |
How do I install/change the RD roll?
If the end of the RD roll has not been fed under the gap (media) sensor, the TD-4000/4100N may not be able to detect the media properly.
Incorrect insertion of the RD roll will not print on the correct side of the label.
Position the end of the RD roll to touch the black plastic cutter guard.
Close the RD Roll compartment cover.
Press and hold the ON/OFF button to turn the TD-4000/4100N on.
Die cut label
Press the Feed button. The printer will position the label to the correct starting position. You are now ready to print.
Continuous length label
Press the Feed button twice and the Cut button. The printer will position the label to the correct starting position. You are now ready to print.