VR
FAQs & Troubleshooting |
How do I wind the bobbin?
Prepare the metal bobbin and the spool of bobbin thread.
(1)Groove in the bobbin (2)Spring on the shaft |
(1)Spool cap |
(1)Hole in the thread guide above the spool |
(1)Thread guide hole |
(1)Pretension disc |
(1)Guide slit (with built-in cutter) (2)Bobbin winder seat |
Be sure to follow the procedure described. If the bobbin is wound without the thread being cut with the cutter, when the bobbin thread runs low, the thread may become tangled around the bobbin and cause the needle to break.
(1)Bobbin winding switch |
(1) Cutter |
When removing the bobbin, do not pull on the bobbin winder seat. Doing so could loosen or remove the bobbin winder seat, and could result in damage to the machine.
(1)Weight (L) (2)Weight (S) |