Press the “Start/Stop” button to stop the machine.
If the upper thread is broken, redo the upper threading. If the bobbin thread is broken, press .
Press "OK". After the thread is automatically cut, the carriage will move.
Unlock the frame-securing lever and remove the embroidery frame.
Be careful not to apply strong force to the fabric at this time. Otherwise, the fabric may loosen in the frame.
Insert a wound bobbin into the machine.
Press "OK". The carriage will return to its original position.
Attach the embroidery frame.
Press .
Press "-1", "-10", "-100" or "-500" to move the needle back the correct number of stitches before the spot where the thread broke.
If you cannot move back to the spot where the thread broke, press to select the color and move to the beginning position of that color, then use "+1", "+10", "+100" or "+500" to move ahead to slightly before where the thread broke.
Press "CLOSE" to return to the original screen.
Press the “Presser Foot Lifter” button to lower the presser foot, and press the “Start/ Stop” button to continue sewing.