FS60
FAQs & Troubleshooting |
How do I thread my machine? (For models equipped with the needle threader)
|
(1) Spool pin (2) Mark on the handwheel |
(1) Presser foot lever |
If the presser foot is not raised, the sewing machine cannot be threaded correctly.
If the needle is not correctly raised, the sewing machine can not be threaded.
Be sure to turn the handwheel so that the mark on the wheel points up before threading the sewing machine.
(1) Mark |
Do not grab the bar to raise the spool pin, otherwise, the spool pin may bend or break.
(1) Spool pin (2) Spool cap |
Be sure to raise the spool pin before use.
If thespool of thread is in the wrong place, or is set incorrectly, the thread may tangle on the spool pin and cause the needle to break.
When sewing with fine, cross-wound thread, use the small spool cap, and leave a small space between the cap and the spool.
(1) Spool cap (small) (2) Spool (cross-wound thread) (3) Space |
(1) Thread guide |
(1) Thread guide cover |
(1) Thread take-up lever |
If the needle is not raised, the thread take-up lever cannot be threaded.
Be sure to press the needle position button to raise the needle before threading the thread take-up lever.
(1) Needle bar thread guide |
(1) Presser foot lever |
(1) Needle holder (2) Needle threader lever (3) Guide |
(1) Hook (2) Thread |
(1) Loop of thread |
(1) Presser foot lever |
(1) 5 cm (2 inches) |