PR-620/620C/600II/600IIC
![]() |
FAQs & Troubleshooting |
When I sew an embroidery pattern exported as DST format in PE-DESIGN, how do I specify whether or not the jump stitches are cut on the embroidery machine of the PR series?
Check the value in the Number of jumps for trim box when the embroidery pattern is exported as DST format in PE-DESIGN, and then check the specified number of jump codes on the embroidery machine of the PR series.
How to find the numerical values on each of the settings screens
When not cutting the upper and bobbin thread before the jump stitch
When cutting the upper and bobbin thread before the jump stitch
A value between 1 and 8 can be specified.
The numerical value in the Number of jumps for trim box when the embroidery pattern is exported as DST format in PE-DESIGN |
![]() |
The numerical value in the number of jump codes on the embroidery machine of the PR series |
For example, if the Number of jumps for the trim box in PE-DESIGN is set to "7" and the number of jump codes on the embroidery machine is set to "8", it will not be cut the upper and bobbin thread before the jump stitch.
The numerical value in the Number of jumps for trim box when the embroidery pattern is exported as DST format in PE-DESIGN |
![]() |
The numerical value in the number of jump codes on the embroidery machine of the PR series |
For example, if the Number of jumps for the trim box in PE-DESIGN is set to "8" and the number of jump codes on the embroidery machine is set to "8", it will cut the upper and bobbin thread before the jump stitch.