Print
|
Close
Innov-is F580
FAQs & Troubleshooting
Embroidery
Problems that occur most in embroidery is misalignment of the pattern.
This is caused mostly because a fabric is loose when it’s set in the embroidery frame.
Make sure to set the fabric tightly into the embroidery frame so that you hear a drum-like sound if you tap the fabric lightly.
Use a stabilizer material when you sew thin fabrics, stretch fabrics or fabrics which easily pucker.
Prepare a stabilizer material that is larger than the embroidery frame being used.
Make sure to attach the correct surface of the stabilizer material to the fabric securely using an iron.
Fusible side of stabilizer
Fabric(wrong side)
Use Brother embroidery threads and needle 75/11 for embroidery.
Print
|
Close