Clean the Paper Pick-up Rollers for Paper Tray #2 and Tray #3

These instructions describe how to clean the paper pick-up rollers for Tray #2.

(HL-J6100DW) The steps for Tray #3 are very similar.

Unplug the machine from the electrical socket.
If the paper support flap is open, close it, and then close the paper support.
Pull tray #2 (1) completely out of the machine as shown by the arrow.
Clean the paper pick-up rollers for tray #2 (1) with a soft lint-free cloth moistened with water. Slowly turn the rollers so that the whole surface is cleaned. After cleaning, wipe the rollers with a dry, soft lint-free cloth to remove all moisture.
Slowly push tray #2 completely into the machine.
Reconnect the power cord.

FAQs & Troubleshooting