MFC-J880DW
![]() |
FAQs & Troubleshooting |
No Paper Fed
There are several reasons that the Brother machine displays "No Paper Fed". Try to follow each step to clear the "No Paper Fed" message.
Cause 1: The machine is out of paper or paper is not correctly loaded in the paper tray.
Cause 2: The photo paper tray is in the wrong position.
Cause 3: The paper was not inserted in the centre position of the manual feed slot.
Cause 4: The Jam Clear Cover is not closed correctly.
Cause 5: Paper dust has accumulated on the surface of the paper pick-up rollers.
NOTE: Illustrations shown below are from a representative product and may differ from your Brother machine.
Do one of the following:
Return the photo paper tray to the Normal printing position when you use cut sheet paper.
Photo Bypass tray in the normal printing position
Photo Bypass tray in the photo printing position
Remove the paper and reinsert it in the centre of the manual feed slot, and then follow the on-screen instructions.
Make sure the Jam Clear Cover is closed evenly at both sides.
Clean the paper pick-up rollers.
> Click here to see how to clean Paper Pick-up Rollers.