MFC-845CW
![]() |
FAQs & Troubleshooting |
Whenever anyone attempts to leave a message, all they hear are funny sounds and eventually a high pitched squeal. Why is this happening?
The problem is that the Message Centre or Digital TAD unit is in the F/T mode and not the Message Centre or TAD mode. The F/T mode will not allow any voice messages to be recorded.You must set up Message Centre or Digital TAD in the following order:
<STEP1> Recording Message Centre or TAD Outgoing Message:
Recording the Message Centre or TAD Outgoing Message is the first step you need to follow before you can turn on the Message Centre or Digital TAD. Make sure your OGM is less than 20 seconds long.
This is the only setting you can select if you want to turn the Message Centre or Digital TAD on.
<STEP2> Activating Message Centre or TAD Mode:
Press and hold the Message Centre or Digital TAD key until the button lights and the screen displays MC:Msg Ctr or TAD:MsgMgr. When the Message Centre or Digital TAD light is out, the Message Centre or Digital TAD is off.