You can use the
Go button or the printer driver to print a test page.
Using control panel button:
-
Turn off the printer.
-
Make sure that the front cover is closed and the power cord is plugged in.
-
Hold down the Go button as you turn on the power switch.
-
Keep Go pressed down until the Back Cover, Toner, Drum and Paper LEDs light up.
-
Release Go. Make sure that the Back Cover, Toner, Drum and Paper LEDs are off.
-
Press Go again. The printer will print a test page.
Using the printer driver:
If you are using Brother's Windows printer driver, click the Print Test Page button in the General tab of the Windows printer driver.