Print  |  Close

HL-1270N

FAQs & Troubleshooting

FAQs & Troubleshooting

All the lights are blinking then the drum is blinking.


This indicates a Fuser Malfunction. 

  • Turn the printer Off, wait 10 minuites and then turn the printer On again.
  • If the alarm continues, perform a Factory Reset:
  1. Turn the printer off.
  2. Hold in the circular button on the front panel of the printer.
  3. Turn the printer back on.
  4. When the DRUM light is lit by itself release the button.
  5. Hold in the circular button on the front panel again.
  6. Once the Alarm light comes on, release the button.
  7. This has performed a factory reset on the printer.

If this does not clear the problem, contact Brother Customer Service.

Print  |  Close