FAX-1360
FAQs & Troubleshooting |
How do I replace the Ink Cartridge?
Replace the Ink Cartridge by following the instructions below:
Pull the lock release lever down and take out the ink cartridge.
Open the new ink cartridge bag, and then take out the ink cartridge.
Remove the protective yellow cap. DO NOT touch the area shown in the illustration below.
The ink cartridge has its own correct position. Insert the ink cartridge in the direction of the arrow on the label.
Lift the lock release lever gently and push it until it clicks, and then close the ink cartridge cover.
If you replaced an ink cartridge, the LCD may ask you to verify that it was a brand new one. (For example, Did You Change Blck?) For the new cartridge you installed, press 1 to select Yes this will automatically reset the ink dot counter. If the ink cartridge you installed is not a brand new one, be sure to press 2 to select No.
If you wait until the LCD shows Near Empty Black and Ink Empty Black, the machine will automatically reset the ink dot counter.
If the LCD shows Install or No Cartridge after you install the ink cartridge, check that the ink cartridge is installed properly.