DCP-7060D
![]() |
FAQs & Troubleshooting |
Clean the corona wire
If you have print quality problems, clean the corona wire as follows:
NOTE: Illustrations shown below are from representative product and may differ from your Brother machine.
Be careful not to inhale toner.
After you have just used the machine, some internal parts of the machine will be extremely hot. Wait for the machine to cool down before you touch the internal parts of the machine.
We recommend that you place the drum unit and toner cartridge assembly on a clean, flat surface with a sheet of disposable paper or cloth underneath it in case you accidentally spill or scatter toner.
Handle the toner cartridge carefully. If toner scatters on your hands or clothes, immediately wipe or wash it off with cold water.
To prevent damage to the machine caused by static electricity, DO NOT touch the electrodes shown in the illustration.
Be sure to return the tab to the home position (1). If you do not, printed pages may have a vertical stripe.
Put the drum unit and toner cartridge assembly back into the machine. Close the front cover.
If "Drum Error" is displayed on the LCD after you cleaned the corona wire, the drum unit is likely near the end of its life. We recommend that you obtain a new drum unit to replace the current one. Click here to learn how to replace the drum unit.